Home
3/16 brass compression fittings
63PT-0340 Dixon Valve Brass Compression Fitting - Brass Insert - 3

63PT-0340 Dixon Valve Brass Compression Fitting - Brass Insert - 3

4.6 (537) · $ 5.50 · In stock

63PT-0340 Dixon Brass Compression Fitting is a Brass Insert, with a 3/16" Tube Size x .040 Wall Thickness. Delrin sleeves and brass inserts convert standard compression fittings for use with industrial grades of thermoplastic tubing.

Advantages:
Delrin® sleeves and brass inserts convert standard compression fittings for use with industrial grades of thermoplastic tubing. No flaring, soldering or other preparation of tubing necessary to assemble. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved.
Specifications:
Underwriter's Laboratories listed for flammable liquid. Compression fittings meet functional requirements of SAE J-512 and ASA.
Assembly Instructions:
Slide nut, then sleeve onto tubing. The thread end of the nut must face out. Insert the tube into the fitting. Be sure the tube is bottomed on the fitting shoulder. Assemble nut to body, and tighten hand-tight. Then follow the number of wrench turns as indicated in the table to the right.

Fitting Size	Tube Size	Turns Required to Seal from Hand-Tight
Fitting Size	Tube Size	60C Series with Soft Metal Tubing	60PT Series with Thermoplastic Tubing
2	1/8	1-1/4	-
3	3/16	1-1/4	-
4	1/4	1-1/4	2
5	5/16	1-1/4	2
6	3/8	2-1/4	2
8	1/2	2-1/4	2
10	5/8	2-1/4	2
12	3/4	2-1/4	2
14	7/8	2-1/4	-

Part Number	Tube Size	Wall Thickness	Material	Weight (Lbs)
63PT-0216	1/8	.016	Brass	0.0010
63PT-0223	1/8	.023	Brass	0.0002
63PT-0232	1/8	.032	Brass	0.0002
63PT-0325	3/16	.025	Brass	0.0006
63PT-0340	3/16	.040	Brass	0.0005
63PT-0440	1/4	.040	304 Stainless Steel	0.0010
63PT-0462	1/4	.062	Brass	0.0025
63PT-0540	5/16	.040	Brass	0.0015
63PT-0562	5/16	.062	Brass	0.0021
63PT-0662	3/8	.062	304 Stainless Steel	0.0100
63PT-0862	1/2	.062	304 Stainless Steel	0.0050
63PT-1062	5/8	.062	Brass	0.0050