4.7 (296) · $ 35.00 · In stock
The Faber Cylinder are manufactured with extremely high quality steel made to international standards. Faber cylinders display a unique combination of size, weight and buoyancy. This tank is 232 bar, with 3 litre (25 cubic foot) capacity and 11mm (3.9 inch) diameter. This tank is probably the second most common steel
The Faber Cylinder are manufactured with extremely high quality steel made to international standards. Faber cylinders display a unique combination of size, weight and buoyancy. This tank is 232 bar, with 3 litre (25 cubic foot) capacity and 11mm (3.9 inch) diameter.
This tank is probably the second most common steel cylinder used on a closed circuit rebreather (CCR), also known as the Faber FX23. This tank is compatible with the Hollis Prism 2 Rebreather.
Tank is supplied with DIN/Yoke convertible valve as standard. They are strong and reliable, made from top quality materials. The inner air passages were carefully studied in the design so as to guarantee top performance. The valve design ensures an excellent grip, facilitating opening and closing of the tank. The valve regulator connection incorporates a threaded insert, which means it can equally be used for both Yoke or DIN connection.
Oxygen Cleaning
If you are planning to use the cylinder with Enriched Air Nitrox (Nitrox) mixes up to 100% oxygen, it's essential for the safety of the cylinder user and the person filling the cylinder that the valve be oxygen cleaned and prepared with special o-rings, seats, and grease designed for exposure to pure oxygen. The cylinder should then be banded with the familiar yellow and green Nitrox band/wrap/sticker, and an Oxygen Clean 'In Test' inspection sticker applied. The Frog Dive technicians can do all of that for you as an add-on service.
Specifications
Fill pressure: 232 bar (3365 psi)
Test pressure: 348 bar (5047 psi)
Standard: BS 5045 Pt 1
Material: 34CRMO4 Chromium Molybdenum Alloy Steel
Manufacturing Process: Cold deep drawing from steel plate
External Primary Finish: Hot Zinc sprayed, layer thickness 60/70 microns
External Final Finish: 2 part polyurethane white paint sprayed and air dried
Internal Finish: Chemically treated with Ferrous Phosphate
Neck Thread: 3/4 inch NPSM
San-o-Sub DIN/Yoke Scuba Tank Valve ($79)
San-o-Sub 300Bar DIN Scuba Tank Valve ($95)
Faber diving - The most popular brand of steel cylinders for scuba
Faber HP23 (3L) Steel Tank
Faber 12.2L Steel Tank with Boot & DIN/K Valve – Infinity Dive
Products – Page 4 – Frog Dive
Faber 10.5L Standard Steel Scuba Tanks with a fill pressure of 232 BAR and come with a Rubber Tank Boot and Yoke DIN/Yoke Valve Supplied. Faber steel
Faber 10.5L Steel Tank DIN / Yoke Valve
Used Faber Low Pressure Steel Tank 85 CF, 13L Silver L85SDVB - Scuba
Faber diving - The most popular brand of steel cylinders for scuba
Faber - FX23 3L Steel SCUBA Cylinder - CCR – Paragon Dive Group
Faber 300 Bar Cylinder With Basic Valve
The high-pressure 23 cubic foot steel cylinder is manufactured in Italy by Faber with a hot-zinc spray coating that is further protected with black
Faber FX23 (3L) Cylinder, Black
Faber Scuba Tank for sale
Faber - FX23 3L Steel SCUBA Cylinder - CCR – Paragon Dive Group
Products – Tagged Tanks – Frog Dive