Home
female elbow fitting
12-DFE-8 Dixon Instrumentation Fitting - Stainless Steel Female Elbow - 3/4 Tube OD x 1/2 Female NPT (Pack of 10) — HoseWarehouse

12-DFE-8 Dixon Instrumentation Fitting - Stainless Steel Female Elbow - 3/4 Tube OD x 1/2 Female NPT (Pack of 10) — HoseWarehouse

4.9 (456) · $ 40.50 · In stock

12-DFE-8 Dixon Instrumentation Fitting is a Stainless Steel Female Elbow, and has a 3/4" Tube OD x 1/2" Female NPT. The fitting features double collet (ferrule) swaging action, and is fully interchangeable with Swagelok and Parker A-Lok fittings

Features:
Fully interchangeable with Swagelok® and Parker A-Lok® fittings. Double collet (ferrule) swaging action. Two positive seal points. ASTM material construction. Material: 316 stainless steel. Temperature Ratings: -325 deg. F to 1200 deg. F (-198 deg. C to 648 deg. C)
Installation Instructions:
Cut tubing squarely and clean tube end thoroughly to remove burrs. Insert the tubing into the assembly making sure the tubing seats firm against the shoulder of the body and the nut is finger tight. Tighten the nut with a wrench 1-1/4 turns, while holding the body with a second wrench.
Safety Guidelines:
Never connect, disconnect or remake a fitting with pressure in the system. Make sure all fittings are properly installed. It is not recommended to go beyond the pressure rating of the tubing. Elongation could occur in the tubing, shrinking the wall thickness and cause potential harm. For proper sealing it is recommended that the tubing and fittings be of like material. Always use proper thread lubricant and sealants on tapered pipe threads. Never bleed a system by loosening a fitting.

Suggested Working Pressures
Wall Thickness	.028	.035	.049	.065	.083	.095	.109
1/4	4,000	5,100	7,500	10,100	---	---	---
3/8	---	3,300	4,700	6,600	---	---	---
1/2	---	2,600	3,700	5,000	6,600	---	---
5/8	---	---	2,900	3,900	5,200	6,000	---
3/4	---	---	2,400	3,200	4,200	4,900	5,700

Part Number	Tube OD	Female NPT	Interchanges	Weight (Lbs)
4-DFE-2	1/4	1/4-18	400-8-2	-
6-DFE-4	3/8	1/4-18	600-8-4	-
8-DFE-8	1/2	1/2-14	810-8-8	-
12-DFE-8	3/4	1/2	1210-8-8	-
12-DFE-12	3/4	3/4	1210-8-12	-
16-DFE-16	1	1	1610-8-16	-

Dixon Industrial Hose Fittings — HoseWarehouse

Dixon Sanitary Fittings Complete, PDF

Dixon SFMF1000 Stainless Steel 304 Female Threaded 37 Degree JIC

Made of Zinc Plated Steel On hose assemblies, pressure rating is the lower of either the rating of the coupling or the hose at 70 degrees F Working

Dixon 1238-08-08 Zinc Plated Steel Hydraulic Pipe Fitting, 90 Degree Elbow, 3/4-16 Male SAE O-ring Boss x 3/4-16 Male SAE Screw

2870812C (287-0812) Dixon Valve Brass Female 45° SAE / 37° JIC

3/8 Tube O.D. x 3/4 NPT Female Connector Fitting – Alabama

Great for attaching 3/4 inner diameter hose, and 3/4 ball valve Maximum working pressure of 150 psi Temperature range from -30 to +150 degrees F 304

DERNORD 3/4 Barbed Hose x 3/4 NPT Female - Home Brew Fitting 304 Stainless Steel Pack of 2

Instrumentation Bulkhead Union

Elbow — Page 3 — HoseWarehouse

Danfoss's Eaton Brass Catalog 2018 - Hose Warehouse by Murdock

Dixon 12-DFE-8 Instrumentation Female Elbow, 1/2 Inch Thread

Dixon Valve & Coupling - Barbed Hose Fitting: 1/4″ x 3/8″ ID Hose

Dixon Pipe, Welding & Tube Fittings — Page 5 — HoseWarehouse

Dixon Sanitary Fittings Complete, PDF